| Issue |
Category |
Page |
Subject/Description |
Author |
|
| 6 |
Drawing |
14-15 |
Aeronca C-3, 3-view |
Factory Drawings |
|
| 26 |
Drawing |
2 |
Aeronca C-3, 3-views and instrument Panel |
Factory Drawings |
|
| 16 |
Drawing |
44 |
Alexander Eaglerock Bullet |
Factory Drawings |
|
| 19 |
Drawing |
50 |
Avion Wibault Type 121, 3-views |
Factory Drawings |
|
| 19 |
Drawing |
51 |
Avion Wibault Type 123, 3-views |
Factory Drawings |
|
| 19 |
Drawing |
52 |
Avion Wibault Type 124 A2, 3-views |
Factory Drawings |
|
| 19 |
Drawing |
53 |
Avion Wibault Type 125 A2, 3-views |
Factory Drawings |
|
| 19 |
Drawing |
54 |
Avion Wibault Type 220 RN3, 3-views |
Factory Drawings |
|
| 19 |
Drawing |
55 |
Avion Wibault Type 260 R2, 3-views |
Factory Drawings |
|
| 19 |
Drawing |
56 |
Avion Wibault Type 280 T10, 3-views |
Factory Drawings |
|
| 19 |
Drawing |
48 |
Avion Wibault Type 70, 3-views |
Factory Drawings |
|
| 19 |
Drawing |
49 |
Avion Wibault Type 73, 3-views |
Factory Drawings |
|
| 13 |
Drawing |
59 |
Beardmore Inflexible, 3-view |
Frank Harris |
|
| 25 |
Drawing |
63 |
Beech B-17L/UC.43, Cabin Parts |
Factory Drawings |
|
| 25 |
Drawing |
62 |
Beech B-17L/UC.43, General Arrangement Drawings |
Aircraft Yearbook |
|
| 18 |
Drawing |
24-31 |
Bellanca D.H. US Mailplane, 3-view with construction details |
Air Service Infomration |
|
| 7 |
Drawing |
21 |
Bellanca Tandem Instrument Panel |
|
|
| 15 |
Drawing |
58-59 |
Boeing 203, 3-seater, 3-views |
Factory Drawings |
|
| 26 |
Drawing |
16 |
Boeing 247D, 3-views |
|
|
| 17 |
Drawing |
59 |
Boeing 314 Control Cabin |
Factory Drawings |
|
| 17 |
Drawing |
60 |
Boeing 314, 1st and 2nd Pilot’s Control Panels |
Factory Drawings |
|
| 17 |
Drawing |
63 |
Boeing 314, Engineer Operator’s panel |
Factory Drawings |
|
| 17 |
Drawing |
53 |
Boeing 314, Main Switch Panel, Engine Fire Extinguisher |
Factory Drawings |
|
| 17 |
Drawing |
63 |
Boeing 314, Radio Operator’s Panel |
Factory Drawings |
|
| 18 |
Drawing |
37 |
Boeing 314, side-view cutaways with dimensions |
Factory Drawings |
|
| 6 |
Drawing |
63 |
Boeing F3B1 Fuselage Construction |
Gene Schmidt |
|
| 7 |
Drawing |
30-33 |
Boeing FB-5, 4-view |
|
|
| 19 |
Drawing |
4 |
Bugatti Model 100, top and side views |
Louis DeMonge |
|
| 27 |
Drawing |
4 |
Buhl Bull Pup, 3-view |
|
|
| 8 |
Drawing |
23 |
Caproni C.113 3/4 Front View |
Factory Drawings |
|
| 8 |
Drawing |
22 |
Caproni C.113 Structural Drawings |
Factory Drawings |
|
| 14 |
Drawing |
31-33 |
Caproni Ca 60, sectional and isometric views |
Factory Drawings |
|
| 6 |
Drawing |
27 |
Caproni Ca100 with Anfibio fuselage Cutaway |
|
|
| 6 |
Drawing |
26 |
Caproni Ca100 with S.63 Engine, 3-view |
|
|
| 18 |
Drawing |
17 |
Chilton D.W.1, 3-view |
Airplane Monthly |
|
| 24 |
Drawing |
|
Commonwealth Aircraft Corp Boomerang variants, 3-views |
Factory Drawings |
|
| 14 |
Drawing |
23-25 |
Comper “Streak” 3-view and construction details |
Aeroplane/Flight |
|
| 20 |
Drawing |
20-23 |
Consolidated Fleetster 17 and 20, 3-views (excellent details) |
D.E. Anderson |
|
| 22 |
Drawing |
44-47 |
Consolidated YIC-11 Fleetster, 4-views and details |
D.E. Anderson |
|
| 14 |
Drawing |
16 |
Curtiss AT-32-1, 3/4 view cutaway |
Factory Drawings |
|
| 1 |
Drawing |
19 |
Curtiss D12D Engine Installation, 4-views |
Factory Drawings |
|
| 26 |
Drawing |
15 |
Curtiss Hawk III, 2-views |
|
|
| 4 |
Drawing |
8 to 11 |
Curtiss Kirkham 18-T-1 “Wasp” 18-T-2, 3-view, landing gear – Float |
|
|
| 2 |
Drawing |
35 |
Curtiss Model C-6 160 B.H.P. @ 1750RPM, 2-view |
R.S. Hirsch |
|
| 15 |
Drawing |
6 & 7 |
Curtiss Orenco D, 3-views |
Factory Drawings |
|
| 5 |
Drawing |
5 |
Curtiss P1 Wing Erection and Fuselage Diagram & Dimensions |
|
|
| 8 |
Drawing |
25-27 |
Curtiss XP-3A, 3-vew and many details |
E.F. Schmidt |
|
| 16 |
Drawing |
13-15 |
deHavilland “Comet” 3-views, sections and details |
NACA Aircraft Circular |
|
| 17 |
Drawing |
72 |
deHavilland “Comet” Main landing Gear Unit |
Airplane |
|
| 2 |
Drawing |
48 |
deHavilland DH Moth, Major, Tiger Moth Undercarriage leg section |
Factory Drawings |
|
| 2 |
Drawing |
44-47 |
deHavilland DH Moth, Method of Repair to Fuselage |
Factory Drawings |
|
| 1 |
Drawing |
15 |
deHavilland DH60 and DH60G Rigging Instructions and 3-view |
Factory Drawings |
|
| 23 |
Drawing |
53 |
Dornier Super-Wal Type D, 3-views and sections |
Factory Drawings |
|
| 26 |
Drawing |
14 |
Douglas Dolphin, 3-views |
|
|
| 9 |
Drawing |
30-31 |
Douglas DT-2 Torpedo Bomber, 3-view and sections |
Factory Drawings |
|
| 19 |
Drawing |
23 |
Douglas M-4 Series Fuel Systems |
Factory Drawings |
|
| 19 |
Drawing |
23 |
Douglas O-2 Series Fuel Systems |
Factory Drawings |
|
| 19 |
Drawing |
19 |
Douglas O-2 Series, rigging diagram |
Factory Drawings |
|
| 7 |
Drawing |
48-49 |
Driggs “Dart” Mk.II, #6, 3-view |
Eric Marsden |
|
| 18 |
Drawing |
5 to 8 |
Edo Equipped Seaplanes, Popular Commercial Floats, 3-views |
D.E. Anderson |
|
| 26 |
Drawing |
15 |
Fairchild XC-31, 3-views |
|
|
| 10 |
Drawing |
22 |
Fleet Empennage, Models 1, 2, 7, F5 – F10, F-11 |
Factory Drawings |
|
| 10 |
Drawing |
23 |
Fleet Engine Installation, Models 2, 7, F5, F10, F11, Model 1 & L.G. |
Factory Drawings |
|
| 10 |
Drawing |
15 |
Fleet F.10, 3-view |
Factory Drawings |
|
| 4 |
Drawing |
39 |
Focke Wulf FW56 “Stosser”, 3-view |
|
|
| 24 |
Drawing |
29 |
Focke-Wulf FW58 B-2, 3-views |
Factory Drawings |
|
| 24 |
Drawing |
28 |
Focke-Wulf FW58 Weihe (Kite) 3/4-view cutaway |
Factory Drawings |
|
| 24 |
Drawing |
29 |
Focke-Wulf FW58C-1 and C-2, 3-views |
Factory Drawings |
|
| 9 |
Drawing |
17 |
Fokker B.Iv, 3-view |
Factory Drawings |
|
| 9 |
Drawing |
7 |
Fokker C.V-D, 3-view |
Factory Drawings |
|
| 9 |
Drawing |
7 |
Fokker C.V-E, 3-view |
Factory Drawings |
|
| 9 |
Drawing |
10 |
Fokker C.VIII, 3-view |
Factory Drawings |
|
| 9 |
Drawing |
10 |
Fokker C.VII-W, 3-view |
Factory Drawings |
|
| 9 |
Drawing |
5 |
Fokker D.XIII, 3-view |
Factory Drawings |
|
| 9 |
Drawing |
6 |
Fokker D.XVI, 3-view |
Factory Drawings |
|
| 10 |
Drawing |
44 |
Fokker F.IX, 3-view |
Factory Drawings |
|
| 9 |
Drawing |
13 |
Fokker F.VIIa, 3-view |
Factory Drawings |
|
| 6 |
Drawing |
48-53 |
Fokker F.VIIB Details and Dimensions |
Factory Drawings |
|
| 5 |
Drawing |
39-44 |
Fokker F.VIIB Trimotor, Southern Cross 3-view & construction details |
Factory Drawings |
|
| 10 |
Drawing |
43 |
Fokker F.VIIb-3M, 3-view |
Factory Drawings |
|
| 10 |
Drawing |
43 |
Fokker F.VIII, 3-view |
Factory Drawings |
|
| 9 |
Drawing |
14 |
Fokker F.XI, Universal, 3-view |
Factory Drawings |
|
| 9 |
Drawing |
15 |
Fokker F.XIV, 3-view |
Factory Drawings |
|
| 18 |
Drawing |
33 |
Fokker F.XX, 3-views |
Factory Drawings |
|
| 9 |
Drawing |
20-23 |
Fokker PW5, 3-view, rib details, stab, rudder, ail, wing, L.G. details |
|
|
| 9 |
Drawing |
3 |
Fokker S.IV, 3-view |
Factory Drawings |
|
| 10 |
Drawing |
44 |
Fokker T.IV, 3-view |
Factory Drawings |
|
| 26 |
Drawing |
70 |
Ford 4-AT-35, Front & Side View |
|
|
| 12 |
Drawing |
56-57 |
Ford Flivver, 3-views and detailed sketches |
Stan Wallis |
|
| 23 |
Drawing |
16 |
General Monospar St.4 – St.4 MK II, 4-views |
Factory Drawings |
|
| 14 |
Drawing |
64-65 |
Glenn D Angle Engine, 3-views and sections, Pat. Pend. |
Factory Drawings |
Engine |
| 8 |
Drawing |
8 to 10 |
Gunsights, Early American Designs, 1920 |
Airplane Designer’s Handbook, 1920 |
|
| 25 |
Drawing |
52 |
Junkers F-13, 3-views |
Vestinik Vozdushnoco |
|
| 10 |
Drawing |
4 |
Junkers Ju.52 11/3m, 3/4 view cutaway |
Factory Drawings |
|
| 10 |
Drawing |
3 |
Junkers Ju.52 Freight Plane |
Factory Drawings |
|
| 12 |
Drawing |
24-27 |
Junkers-Larsen JL-6, 3-views and many details |
Air Service Information |
|
| 23 |
Drawing |
17 |
Kalinin K1, 3-views |
Factory Drawings |
|
| 24 |
Drawing |
20-21 |
Kalinin K12, 3-views and detials |
Factory Drawings |
|
| 24 |
Drawing |
18-19 |
Kalinin K5, 3-views and details |
Factory Drawings |
|
| 17 |
Drawing |
56-58 |
Kalinin K-7, 3-views and many details, sections and construction |
Factory Drawings |
|
| 26 |
Drawing |
13 |
Laird LC-EW 450, 3-views |
|
|
| 15 |
Drawing |
39 |
Lambach H.L.II 3-views |
Factory Drawings |
|
| 6 |
Drawing |
5 |
Lawrence J1 Engine, 2-view |
Aircraft Yearbook 1922 |
Engine |
| 16 |
Drawing |
9 |
Lawson 100 passenger Airliner |
Factory Drawings |
|
| 16 |
Drawing |
7 |
Lawson Armored Batiler, Side View |
Factory Drawings |
|
| 16 |
Drawing |
6 |
Lawson MT-2, 3-views |
|
|
| 16 |
Drawing |
5 |
Lawson Primary Trainer (Tractor Type), 3-views |
McLaughlin |
|
| 9 |
Drawing |
47 |
Leblond Model 60 Aircraft Engine, 4-view |
Factory Drawings |
Engine |
| 17 |
Drawing |
19 |
Lenape AR-3, 50HP, 3-cylender Engine, Side View |
Factory Drawings |
Engine |
| 20 |
Drawing |
52-55 |
Leoning Amphibian OL-6/8, 4-views |
Factory Drawings |
|
| 5 |
Drawing |
52-55 |
Levasseur – 16 different models, 3-views |
|
|
| 25 |
Drawing |
20-21 |
Levasseur PL107, No.1, 3-views |
Factory Drawings |
|
| 3 |
Drawing |
28-29 |
Levasseur PL8 “l’oiseau Blanc (White Bird) Transatlantic Paris-NY |
Herb Kelley |
|
| 12 |
Drawing |
37 |
Lockheed “Orion” 9E, Landing Gear Detail |
Aero Digest |
|
| 26 |
Drawing |
8 |
Lockheed Orion, Detroit News, with Floats, Side view |
|
|
| 26 |
Drawing |
3 |
Lockheed Vega, Earhart’s, 3-view and Instrument Panel |
|
|
| 16 |
Drawing |
37 |
Loughead Bros Alcor (Lockheed) |
Factory Drawings |
|
| 16 |
Drawing |
39 |
Loughead Bros method of molding spruce veneer fuselage skins |
Ken Blackwood |
|
| 16 |
Drawing |
36 |
Loughead Bros Olympic DUO-4 (Lockheed) |
Factory Drawings |
|
| 16 |
Drawing |
38 |
Loughead Bros Olympic DUO-4, wing rib test specimen (Lockheed) |
Factory Drawings |
|
| 11 |
Drawing |
17-19 |
Loughead Gurnard, partial 3-view and cutaways |
Factory Drawings |
|
| 1 |
Drawing |
23 |
McDonnell Douglas O-43A Technical Data |
Factory Drawings |
|
| 13 |
Drawing |
25 |
Menasco B-4, Installation, 4-view with details |
Factory Drawings |
Engine |
| 13 |
Drawing |
27 |
Menasco B-6, Installation, 4-view with details |
Factory Drawings |
Engine |
| 13 |
Drawing |
29 |
Menasco B-6S, Installation, 4-view with details |
Factory Drawings |
Engine |
| 13 |
Drawing |
26 |
Menasco C-4, Installation, 4-view with details |
Factory Drawings |
Engine |
| 13 |
Drawing |
28 |
Menasco C-4S, Installation, 4-view with details |
Factory Drawings |
Engine |
| 10 |
Drawing |
52-53 |
Nardi FN305, 3-view and many details |
Leonardo Ferrazzi |
|
| 4 |
Drawing |
23 |
Nardi FN305, Side view |
|
|
| 15 |
Drawing |
65 |
Noordyyn Norseman Instrument Panel |
Roy Meyers |
|
| 20 |
Drawing |
39 |
North American NA-40 3-views |
Factory Drawings |
|
| 20 |
Drawing |
36 |
North American NA-40 Cutaway |
Factory Drawings |
|
| 12 |
Drawing |
17-19 |
North American O-47A, 3-views and many details |
Paul Matt |
|
| 26 |
Drawing |
11 |
Northrop Delta, 3-views |
|
|
| 11 |
Drawing |
11 to 12 |
Panda D, 2-view, Side and wing |
Frank von Dalen |
|
| 11 |
Drawing |
10 |
Panda D, 3/4 view, partial cutaway |
Frank von Dalen |
|
| 22 |
Drawing |
11 |
Panda D, 3-views and Specifications |
Factory Drawings |
|
| 22 |
Drawing |
31 |
Payen AP10 with Train Engine, 3-views |
Hubert Cange |
|
| 22 |
Drawing |
30 |
Payen AP10, 3-views |
Hubert Cange |
|
| 22 |
Drawing |
31 |
Payen PA100, 3-views |
Hubert Cange |
|
| 22 |
Drawing |
34 |
Payen PA112, 3-Views |
Hubert Cange |
|
| 22 |
Drawing |
33 |
Payen PA22 V2, V4, V5, side views |
Hubert Cange |
|
| 22 |
Drawing |
32 |
Payen PA22, 3-views |
Hubert Cange |
|
| 22 |
Drawing |
32 |
Payen PA22R, 3-views |
Hubert Cange |
|
| 22 |
Drawing |
35 |
Payen PA320, 3-Views and Isometric Views |
Hubert Cange |
|
| 23 |
Drawing |
71 |
Payen PA49, 3-views |
Factory Drawings |
|
| 23 |
Drawing |
71 |
Payen PA51, 3-views |
Factory Drawings |
|
| 23 |
Drawing |
71 |
Payen PA60, 3-views |
Factory Drawings |
|
| 16 |
Drawing |
43 |
Piaggio Pegna Pc.7, 3-views |
Le Modeli Reduit D’Avions |
|
| 2 |
Drawing |
55 |
Pitcairn Fleetwing Deluxe 3-view |
Factory Drawings |
|
| 14 |
Drawing |
61 |
Pitcairn XOP-1, 3-views and Colors |
Aldo Zanfi |
|
| 20 |
Drawing |
12 to 15 |
Polikarpov R-5, 3-views, with and without Floats, many details |
Factory Drawings |
|
| 9 |
Drawing |
56 |
R101 Airship, side view |
Factory Drawings |
|
| 21 |
Drawing |
59-63 |
Republic Seversky P-35, P-35A Construction Drawing |
Factory Drawings |
|
| 26 |
Drawing |
3 |
Ryan ST, 3-views and instrument panel |
|
|
| 26 |
Drawing |
56-60 |
Savoia Marchetti S.81, Cutaway views and detailed parts list |
|
|
| 10 |
Drawing |
32-33 |
Savoia Marchetti S-55P, 3-view and colors |
Matt Hargreaves |
|
| 14 |
Drawing |
73 |
Shelton Crusader, 3/4 cutaway |
Crusdaer (book) |
|
| 12 |
Drawing |
38 |
Sikorsky S-40 Fuselage Cutaway |
Aero Digest |
|
| 21 |
Drawing |
18-19 |
Soviet Glider Torpedo Projects, 1933-1940, PSN, PSN-2, PPT |
Factory Drawings |
|
| 3 |
Drawing |
35-39 |
Sperry Messenger, 3-view and details |
Chuck Hafner |
|
| 26 |
Drawing |
5 |
Stinson SR-6, 3-views and Instrument Panel |
|
|
| 11 |
Drawing |
28-29 |
Thomas Morse MB-3 3-views and many details |
Herb Kelley |
|
| 11 |
Drawing |
24-25 |
Thomas Morse MB-3 side-view cutaway |
Frank Harris |
|
| 11 |
Drawing |
25 |
Thomas Morse MB-3 side-view cutaway |
Jim Dunavent |
|
| 22 |
Drawing |
22-24 |
Thomas Morse MB-3, 3-views & wings w/location of pressure holes |
NACA Report |
|
| 10 |
Drawing |
10 to 12 |
Time Flies Racer Q.E.D., Granville, Miller & De Lackner 3-view |
Factory Drawings |
|
| 2 |
Drawing |
32-35 |
Travel Air B6C Special 3-view |
R.S. Hirsch |
|
| 23 |
Drawing |
34-35 |
Tupolev ANT-4, 3-views and details |
Factory Drawings |
|
| 25 |
Drawing |
12 to 15 |
Verville VCP-R/R1, 3-views and sections |
Herb Kelley |
|
| 13 |
Drawing |
62-63 |
Vought VE-7, 3-views |
Air Service Drawing |
|
| 13 |
Drawing |
54-55 |
Vought XSB2U-1, 3-views and general Characteristics |
Factory Drawings |
|
| 7 |
Drawing |
53 |
Vought-Sikorsky VS-44A, Side view |
Factory Drawings |
|
| 26 |
Drawing |
11 |
Vultee V-1A, 3-views |
|
|
| 14 |
Drawing |
58-59 |
Waco ATO Taperwing 3-views, detailed |
Peter Westburg |
|
| 26 |
Drawing |
4 |
Waco CJC, 3-views |
|
|
| 21 |
Drawing |
53 |
Wibault-Penhoet Type 365 T.7 |
Factory Drawings |
|
| 6 |
Drawing |
6 to 9 |
Wright Whirlwind Engines J4A, J4B, J5 Installation Master |
Factory Drawings |
Engine |
